Products - MidwestHose.com

Download our full product catalog!

OIL & GAS

CONSTRUCTION

INDUSTRIAL

MINING

AGRICULTURE

FOOD & BEVERAGE

TPU Layflat Hose

Designed for produced water/fresh water transfer. Typically used for hydraulic fracture used for hydraulic fracture damaged hydrant lines, or to replace a broken water main. Manufactured with NSF standard 61 approved materials for use with potable water.

Warflex Hose

A more economical alternative to our polyurethane layflat hose. Warflex is reinforced with high–tenacity polyester yarn and coated through the weave with a 70% nitrile rubber / 30% PVC blend for good chemical resistance for produced water. Less abrasion resistance and puncture resistance. Custom hose color and branding available on big volume orders.

MWH Deployment System

The new Midwest Hose Layflat Deployer completes our extensive water transfer portfolio. Our Direct Drive System makes our deployer one of the fastest, most powerful, and easy to use on the market with the capacity to deploy and retreive layflat hose up to 16″ in diameter.

Choke & Kill Armor Hose

Designed for general choke and kill service. Used as a flexible connection (instead of pipe) to the choke manifold.

Choke & Kill Red Hose

Designed for burner, test, acidizing, cementing, fracking, high pressure jetting, and H2S operations. Used as a flexible connection (instead of pipe) between the riser and manifold or around the ball joint of offshore drillings rigs.

BOP Hose

Ideally suited for any high pressure hydraulic applications where there is a need for hoses to be Fire Rated and capable of working in extreme heat in the event of an emergency.

Grade D Hose

Designed for mud delivery, mud jumper, motion compensator, decoking, and water injection operations on a drilling rig. Used as a flexible connection (instead of pipe) between the standpipe and swivel (rotary) or between the pump and standpipe (vibrator) for pumping mud in drilling and exploration work.

Grade E Hose

Designed for mud delivery, mud jumper, motion compensator, decoking and water injection operations on a drilling rig. Used as a flexible connection (instead of pipe) between the standpipe and swivel (rotary) or between the pump and standpipe (vibrator) for pumping mud in drilling and exploration work. Can handle higher flow rates than Grade D.

Cement Hose

Designed for cementing service or acidizing service on a drilling rig. Used as a flexible connection (instead of pipe) to connect the cementing pump manifold and cementing head.

Slim Hole Hose

Designed to operate between 2,000 and 3,000 psi for water well, core drill, blast, or shot hole operations on portable drilling rigs, work-over rigs, slim hole and seismograph rigs.

MWH1SN

MWHR17

MWH2SN

MWHR16

MWHR12

MWH4SH

MWHR13

MWHR15

Jack Hose

MWH2SNAT

MWH100R5 / R5AT

Hot Oiler Hose

Pressure Washer Hose

MWHR4

Jack TH Hose

Sewer Hose

CNG Hose

MWHR7

Microbore Hose

Noncollapsible Hose

MWHR14

MWHR14SC

MWHR14PC

Tank Truck 150 PSI Hose

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics.

Tank Truck Corrugated 150 PSI Hose

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics.
Corrugated construction gives the hose greater flexibility.

Tank Truck 300 PSI Hose

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics.
Corrugated construction gives the hose greater flexibility.

Tank Truck Corrugated 500 PSI Hose

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics.
Corrugated construction gives the hose greater flexibility.

Oilfield Vacuum Corrugated 150 PSI Hose

Designed for oilfield waste pit recovery service. Ideal for handling crude oil, salt and freshwater, tank bottoms, and drilling mud up to 35% aromatics.Tube is designed to handle diluted solutions of hydrochloric acids and diesel fuels.
Corrugated construction makes this hose more flexible.

Tank Truck Corrugated Low Temp 150 PSI Hose

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics.
Corrugated construction makes this hose more flexible.

Tank Truck Ribbed 150 PSI Hose

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 35% aromatics.
Ribbed construction makes this hose more flexible than the corrugated design but also less durable.

Mud Pump Suction Hose

Designed as an oilfield suction hose used between the slush pump and mud pit to absorb the mud. Has a tank truck hose construction.

OS &D Tank Truck Hose

Designed to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics. Used as a heavy duty suction and discharge dock hose.

Short Frac Tank Assemblies

Designed to handle diesel, ethanol, gasoline, oil, and
petroleum based products that has up to 50% aromatics. Can also handle salt and fresh water, drilling muds, and mild solutions of hydrochloric acid.
Assembled with female frac tank ends crimped with short ferrules designed to maintain maximum flexibility.

Tank Truck Corrugated flexible, more durable, 30 in/HG full vacuum.
Tank Truck Ribbed most flexible, easiest to keep straight, 25 in/HG vacuum.

Chemical 400 PSI Hose

Hoses have a higher working pressure than normally available chemical hoses. CPE handles a wide variety of acids, alcohols, salt solutions, and petroleum based products.
UHMW handles almost every common industrial chemical used in industry today (98% of chemicals) without staining/contamination.

Chemical 250 PSI Hose

Lightweight chemical transfer hose designed for almost every common industrial chemical used in industry today (98% of chemicals) without staining / contamination.
UHMW handles a wider variety of chemicals than XLPE at virtually the same cost.

Multipurpose Suction Hose

Designed for air-operated construction equipment and tank truck service.

Yellow Wire Braid Hose

Designed for air-operated construction equipment, can handle oil mist from compressors. The standard for heavy duty rock drilling.

Hot Air Blower Hose

Designed to convey hot non-oily air from blower or compressor to storage tank in the transfer of dry bulk materials. Can also be used for transferring mild chemicals at ambient temperatures.

Rubber Water Suction Hose

Designed for water, salt water, and mild acids such as water based agriculture fertilizers.

Clear with Orange Helix Water Suction Hose

Designed for applications that required the hose to slide easily or require visual confirmation of material flow. Great for pumping water and light chemical solutions. Popular with pumping equipment because it handles suction discharge uses.

Petroleum Lightweight Gas Drop Hose

Designed to transfer biodiesel and ethanol blends, gasoline, and other petroleum based products under pressure, gravity flow, or medium suction. Handles up to 50% aromatics.
Has a static conductive tube and copper static wire.

EPDM Suction Hose

Lightweight, flexible, rugged suction/discharge hose that has good chemical resistance. Excellent for transferring fertilizer solutions, septic solutions, and pesticides. Hose remains flexible in sub-zero temperatures. Helix serves as a scuff strip.

Clear / Green PVC Suction Hose

Economical general service suction and discharge hose used for pumping water and light chemical solutions. PVC helix increases flexibility and abrasion resistance while the smooth interior provides maximum flow.

Frac Discharge Hose

Designed for discharge use of petroleum based fluids, dilute acids, chemical and abrasive slurries used in oil and gas well stimulation and fracking.

Water Discharge Hose

Designed for water discharge in construction, heavy duty equipment rental, and mines and quarries. Soft-wall hose construction provides similar performance to a layflat hose but a higher working pressure and more abrasion resistance.

Dry Material Discharge 75 PSI Hose

Designed for dry bulk transfer of bulk cement, grains, animal feed, and other dry abrasive materials. High abrasion resistant tube resists cutting and gouges. Can be rolled for transport and storage.

Dry Material Discharge 150 PSI Hose

Designed for dry bulk transfer of bulk cement, grains, animal feed, and other dry abrasive materials. High abrasion resistant tube resists cutting and gouges. Can be rolled for transport and storage.

Liquid Mud 500 PSI Hose

Mud discharge hose designed for petroleum waste, drilling mud, diesel, and water. The standard to transfer liquid mud at high pressures from the mud pump.

Potable Water FDA Hose

Designed for discharge of potable water or liquids not containing oils or chemicals from a supply ship to an offshore drilling rig or temporary water lines in construction or industrial applications. Tube meets FDA requirements.

High Pressure Water Jetting Hose

Designed to transfer water in inland water ways and offshore high pressure water jetting service. Meets all USCG requirements.

Concrete Pumping Hose

Designed to handle plaster, grout, and concrete at the critical ex areas of a concrete boom truck and high pump concrete boom.

Sandblast Hose

Designed for sand, steel, shot, or other sharp abrasives to handle cleaning, cutting, or finishing stone, glass, or metal surfaces.
Static conductive tube prevents the build up of electrical charges.

Yellow Multipurpose Air 500 PSI Hose

Non-conductive and MSHA approved hose can handle air, oils, fats, keorsene, gasoline, and petroleum products.

Push-On 300 PSI Hose

Designed for use with push-on fittings for air tools, petroleum products, gasoline, mild chemicals or water. No clamps or special tools required. Hose reinforcement laid at the most effective angle for maximum strength and coupling holding ability.

Liquid Propane Gas 350 PSI Hose

Designed for transfer liquid propane gas or butane. Can also transfer natural gas in open, well vented areas at 1 PSI max. UL21 LP Gas/Natural Gas approved.
NOT for compressed natural gas.

Fuel Oil Delivery 250 PSI Hose

Designed to transfer fuel oils, diesel, or commercial gasolines. Compatible with bio-diesel fuels up to B20. Smooth cover resists dragging. Static wire included on all sizes.

Farm Tank Fuel 50 PSI Hose

For gravity of electric pumps dispensing of oils, gasoline, diesel, and petroleum products. Typically used with farm or barrel-type pumps where UL approval is not required. Has static wire, designed for use with electric pumps.
NOT for gas station use. Only UL 330 listed hose used for gas station use. NOT for aircraft fueling.

EPDM Steam 250 PSI Hose

Wire braid steam hose for saturated and superheated steam up to 250 PSI 450° F. Cover is pin pricked to allow venting to eliminate blistering and cover separation.
Steel wire braids can be utilized as a static wire to make the hose assembly electrically conductive.
NOT for use with detergents.

DRAIN AFTER USE!

PVC Air 300 PSI Hose

General purpose hose that can handle air, water, oil, mist, and mild chemical applications.

Twin Line Welding Assemblies Grade R

Designed for portable or production line welding in factories, ships, construction, etc. Meets RMA and CGA (Compressed Gas Association) specifications for Type VD.

Multipurpose Air Hose

Designed to handle oily mists used to lubricate pneumatic tools. Tube is good for air and oil. Suitable for light agriculture spraying such as diluted solutions of herbicides.

Air Tool Assemblies

Blue PVC, Red EPDM
3/8″ hose with 1/4″ MPT end (crimped)

Jackhammer Assemblies

Red EPDM, Yellow EPDM
3/4″ or 1″ hose with crowsfeet (crimped)

Contractors Water Assemblies

Coupled Male x Female with brass Garden Hose Threads. Designed for water transfer and wash down.

PVC Spray Hose

Spray lawns, trees, and similar applications with diluted solutions of water and oil based pesticides and herbicides. Can also handle compressed air.
Spray hose for fertilizers, herbicides, and insecticides in the agriculture and lawn care industries. Can also handle water and compressed air.

Layflat Discharge Hose

General purpose hoses for open end discharge. Non-absorbing, mildew proof, and rolls up flat for easy storage and handling. Common in construction, agriculture, irrigation, marine, and rental applications. PVC hoses resistant to oils, grease.

Edible Oil FDA Hose

Designed to handle edible liquids, vegetable oils, salad dressings, vinegar, mustard and meat products requiring a sanitary hose which will not impair taste. Great for service with hot oil fat filters and fryers.

PVC Braided FDA (Polybraid) Hose

Designed for food and beverage dispensing, potable water, air breathing lines, packaging and equipment, lube lines, and other visual flow applications.

PVC Suction FDA (Polywire) Hose

For suction/discharge use and allows visual flow inspection. Designed for industrial vacuum pumps, food and beverage dispensing, air and water supply, car wash, coolant lines, and deionized water systems.
Meets FDA, USDA, and 3A standards.

PVC Tubing FDA Hose

Clear polyvinyl chloride tubing provides fullview of flowing product. PVC is good to excellent for acids, fair to excellent for alkalies, and excellent for most solvents.
NOT for ketones, esters, and some aromatic hydrocarbons.
Used for general use, sight gauges on storage tanks, air conditioning drainage, refrigeration drainage, air line, and printing press equipment.

Polyethylene Tubing FDA Hose

Linear low density polythylene food grade tubing for standard industrial applications such as the transfer of air and liquids, water lines, water softener lines, pneumatic logic control lines, and vending equipment.
Excellent resistance to solvents and stress cracking.

Single Jacket Mill Hose

Designed for open end discharge applications. Uses include connections to fire hydrants, dust control water trucks, water spraying, and water discharge. Immune to mildew.

Double Jacket Mill Hose

Double jacket for rugged environment. Immune to mildew.

Fire Assemblies

Light weight single-jacket hose. High tear strength and oil and grease resistant. Used in fire brigades. Immune to mildew.

Booster Hose

Preconnected to pump of an engine (and the booster tank) for putting out small fires near the tank without having to connect to a fire hydrant (brush pumper).

Expansion Joints

Expansion joints are used to accommodate the movement of pressurized piping systems caused by thermal growth, pressure contraction, machine vibration, seismic disturbances and installation irregularities. The expansion joint will carry numerous types of media including steam, emission gases, water, acids, alkalies, and hydrocarbons.

Brake Hose

for brake fluid
Designed as a hydraulic brake hose for vehicles and motorcycles. The average life of a brake hose is six years. Brake hoses swell with age and restrict flow. Generally all brake hoses on a vehicle deteriorate at the same rate.

All assemblies pressure tested to 3,000 psi.

Stainless Steel Brake Jacketed Hose

Compatible with all brake fluids.

Automotive Hose

Air Brake Tubing, Steel Brake Line Tubing Assemblies, Steel Brake Line Tubing Coils, Rubber Air Brake Hose, Silicone Coolant Hose, Silicone Heater Hose, GPR Radiator Hose, Rubber Heater Hose, Garage Exhaust Hose, Air Conditioning Hose

Industrial Hose Connections

Camlocks, Petroleum Handling, Industrial and Oilfield Hose Ends, External Swage Hose Ends (Holedale), Crowsfeet Couplings, Sand Blast Couplings, Ground Joint Couplings, Bauer Style Quick Connects, Ringlock Fittings, Storz, Foot Valves and Strainers, Airline Accessories, Industrial Accessories, Clamps, Pressure Washer, Safety and Protection Products

Composite Hose

Light weight and flexible for easier handling. Flexibility retained at low, even cryogenic temperatures (below -238° F). Excellent resistance to kinking or crushing. Suction and Discharge use. Up to 100% aromatics, no permeation of gases. All assemblies tested to 1.5 x working pressure.
Not for dry material service.

Ducting Hose

Air conditioning, ambient air movement, dehumidification, heating, sewn construction, and insulated and non-insulated available. Excellent UV compensation with mold and mildew inhibitors for demanding outdoor conditions. Flame resistant in accordance with UL94VTM-O, California Fire Marshal, and NFPA701 Method 2 specifications.

Stainless Steel Metal Hose

Available in sizes 1/4″ – 12″. Operates in high/low temperatures. Fire safety up to 1200° F. No permeation of gases. Full vacuum. Annular is hydroformed, a process that enhances flexibility and extends the life of the hose. Suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum.

Hammer Unions

Unions conform to NACE, ISO, DNV, and API standards and are interchangeable with other brand name manufactuerers adhering to industry standards. Materials conform to ASTM A105N Forged Carbon Steel, AISI 4130, and AISI4140. NPT threads conform to ASME B1.20.1. Figures 206, 207, G, 1002, and 1003 have O-Rings.

Flowline & Frac Tank Supplies

Plug Valves, Swivel Joints, J-55 and N-80 Pup Joints, Integral Fittings, Steel Hose Loops, Crossover Adapters and Swages, Blast Joints, Manifolds, Bull Plugs and Caps

Pipe Fittings & Flanges

Schedule 40 Pipe Fittings, Schedule 80 Pipe Fittings, Merchant Steel Pipe Fittings, XXH Nipples and Schedule 60 Nipples, Forged Steel, Stainless 304/316 Schedule 40, Grooved Nipples, Fittings, and Couplings, Swage Nipples, Oil Country Swage Nipples, Bull Plugs, Oil Country Bull Plugs, Merchant API Couplings, Bolted Sleeve Couplings, ANSI Flanges, API Flanges, Orifice Plates, AWA Plate Flanges, Shedule 40 and Schedule 80 Butt Weld Fittings

Production, Drilling, Well Service Products

Drill Slips, Elevators, Tong Dies, Gate Vales, Shear Relief, Float Valves, Swivel Joints, Specialty Unions, Flow Tees, Stuffing Boxes, Check Valves, Ring Gaskets, Tubing Couplings, Pulsation, Dampener, Bladders, RAM Rubbers, Pip Wipers

Valves

Ball Valves, Butterfly Valves, Check Valves, Gate Valves, Needle Valves, Flow Control Valves, Instrument Manifold Valves

Belts, Sheaves, Bushings

Classical Belts, Narrow Belts, Cogged Belts, Kevlar Belts, Banded Belts, Classical Sheaves, Narrow Sheaves, QD Bushings

Instrumentation

Unions, Connectors, Elbows, Tees, Stub Tube Connectors, Caps and Plugs

Gauges

CDS Series, CF Series, CFC Series, PDLC Series, PDSS Series, Bi-Metal Thermometers, Thermowells

Quick Couplings

ISO-A Series, ISO-B Series, Agricultural Series, Dry Break Series, ISO-16028 Series, Wing Series, Wing 5000 Series, Snap Tite ‘H’ Series, Extreme Pressure Series, Straight-Through Series, VEP BOP, Wing 5000 BOP, Multi-Coupler Plates and Saturn Block, Industrial Series, Tru-Flate Series, ARO 210 Series, Lincoln Series

Steel Adapters

37° JIC, Pipe, Pipe Swivel, O-Ring Kits, O-Ring, Split Flange, Face Seal, Hose Barb, Flareless Bite Type, Metric, BSPP, BSPT, Inline Live Swivel, 90° Live Swivels, 90° Dual Plane Live Swivels, Test Points, Thread ID Kits

Brass Fittings

Inverted Flare, SAE 45° Flare, Compression, Self Aligned, Polyline Flareless, Push-Connect, Push-Connect Air Brake, Compression for DOT, Compression for Air Brake Copper Tubing, Threaded Sleeve, Pipe Fittings, Needle Valves, Drain Cocks, Truck Valves, Ground Plugs, Multiple Shut-Offs, Hose Barbs, Push-On Hose Barbs, Garden Hose Fittings

Need help? Call our support team at 1-800-375-2358